To change IP address in Windows 7 please follow these steps:
1. Start - All Programs, Accessories and right click on Command Prompt and then chose "Run as Administrator"
or
2. "Start" and then type in "Search" field "cmd"
3.Right click on "cmd.exe" and then chose "Run as Administrator"
4. Type "ipconfig /release"
5. type "ipconfig /renew"
To change IP address automatically in Windows 7 follow these steps:
1. Start and then go to Control Panel
2. Left click on "Network and Internet" and then choose "Network and Sharing Center"
3. On the left side choose "Change adapter settings"
4. Right click on your network card and from the drop-down choose "Properties"
5. Under the "Networking" tab
6. Choose "Internet Protocol Version 4 (TCP/IPv4)" or "Internet Protocol Version 6 (TCP/IPv6)" and then click on "Properties"
7. In next window you have option between "Obtain an IP Address Automatically" and "Use the following IP Address"
8. You need almost always to select "Obtain an IP Address Automatically" to change IP address automatically
9. Finally click on "OK" and your IP address should be changed.
1. Start - All Programs, Accessories and right click on Command Prompt and then chose "Run as Administrator"
or
2. "Start" and then type in "Search" field "cmd"
3.Right click on "cmd.exe" and then chose "Run as Administrator"
4. Type "ipconfig /release"
5. type "ipconfig /renew"
To change IP address automatically in Windows 7 follow these steps:
1. Start and then go to Control Panel
2. Left click on "Network and Internet" and then choose "Network and Sharing Center"
3. On the left side choose "Change adapter settings"
4. Right click on your network card and from the drop-down choose "Properties"
5. Under the "Networking" tab
6. Choose "Internet Protocol Version 4 (TCP/IPv4)" or "Internet Protocol Version 6 (TCP/IPv6)" and then click on "Properties"
7. In next window you have option between "Obtain an IP Address Automatically" and "Use the following IP Address"
8. You need almost always to select "Obtain an IP Address Automatically" to change IP address automatically
9. Finally click on "OK" and your IP address should be changed.
 |
To change IP address in Windows 7 / Vista
STEP 1:: If you have a router:
ü
Turn
both your router AND your modem OFF.
ü
Disconnect
the router from your computer and modem.
ü
Connect
your modem directly to your computer.
ü
Restart
your computer and modem.
ü
Wait
30 seconds for connection to restart.
ü After restarting, surf to some websites
to make sure that your connection is back online.
STEP 3 ::
ü Click
on your "Start" menu and type "cmd" in the white box.
ü Press
Enter.
STEP 4 ::
ü At
the prompt type "ipconfig /release"
ü Press
Enter.
STEP 5 ::
ü Turn
your modem OFF.
ü Wait
20-30 seconds.
ü Turn
modem back ON.
ü Wait
another 30-40 seconds.
STEP 6 ::
ü Click
your "Start" Menu -> Control Panel
STEP 7 ::
ü Click
on "Network and Internet", and then "Network and Sharing
Center"
STEP 8 ::
ü Click
on the link for "Manage network connections"
STEP 9 ::
ü Right-click
on your "Local Area Connection" and click "Disable".
STEP 10 ::
ü Again,
right-click on your Local Area Connection, but this time click
"Enable".
ü Wait
20-30 seconds.
STEP 11 ::
Congratulations, I
hope these tricks are helpful to changing your IP address in Windows 7 and
Vista!
Note:- Remember to clear your browser cookies
before surfing. Otherwise, it's possible that websites will simply associate
your previous IP with your new one by identifying an already installed cookie.
Please give any review about change
ip address on website contact form. Click here
